DESIGN AND FABRICATION OF A SOLAR POWERED ROOF EXHAUST FAN

Authors

  • U. Nirmal Center of Advanced Materials and Green Technologies Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450, Melaka, Malaysia
  • W.T. Chan Center of Advanced Materials and Green Technologies Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450, Melaka, Malaysia
  • S.T.W. Lau Center of Advanced Materials and Green Technologies Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450, Melaka, Malaysia
  • P. Maratha Center of Advanced Materials and Green Technologies Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450, Melaka, Malaysia

Abstract

In modern societies, every building should have a heating, ventilation and air conditioning (HVAC) system that provides sufficient comfort. However, the affordability and ease of installation of these systems vary widely. This research intends to design a solar powered roof exhaust fan with a simple installation design. The design has a structure such that parts are oriented around the axis of the fan. Two types of fans were tested: a centrifugal fan and an axial fan. In these experiments, parameters such as ambient, room and attic temperature were measured. The results showed that the centrifugal fan is more effective than the axial fan.

Downloads

Download data is not yet available.

Downloads

How to Cite

Nirmal, U., Chan, W., Lau, S., & Maratha, P. (2015). DESIGN AND FABRICATION OF A SOLAR POWERED ROOF EXHAUST FAN. Journal of Advanced Manufacturing Technology (JAMT), 9(2), 41–50. Retrieved from https://ojsdemo.utem.edu.my/jamt/article/view/582

Issue

Vol. 9 No. 2 (2015)

Section

Articles

Most read articles by the same author(s)